Router Mount

router mount fits all of our models. make the selection that matches the router you intend to use.

Constructed of extremely durable HDPE (High Density Polyethylene) with Baltic Birch 1/2" prefinished plywood top with steel supports.
4 wire bipolar 425 ounce/in Nema-23 motors
home switches on all 3 axes
Steel-reinforced urethane 3mm pitch 15mm wide synchronous drive belts.
Linear motion system with ball bearings preloaded on 1.5 " square 1/8" thick walled steel tubing on X axis and 1.5" square steel tubing on Y axis for ultra smooth motion with zero slop.
X and Y axis have strip brushes to keep the rails clean and smooth. z axis has rubber seals.
Z-axis features 20mm hardened linear rail with recirculating ball linear bearings.
Matrix of 1/4-20 threaded steel inserts in the table for convenient fastening of the workpiece.
Assembled entirely with steel bolts so all parts are replaceable.
All parts are cut on a professional CNC router to snap or press-fit tolerances to ensure proper fit and alignment.
Ships with the gantry risers unbolted from the bottom to minimize shipping costs. (Assembly is easy – just tighten 8 bolts)
1-year warranty on manufacturer's defects. email and phone support for life. Replacement parts available.
30-day satisfaction guarantee. Just return undamaged for a full refund (minus shipping)

zenbot cnc router
Gecko G540 control box
Mach 3 control software
A PC that meets mach 3 requirements (check very carefully). you need a desktop PC running windows 7 32 bit with a parallel port (old style printer port) and a non-integrated graphics card (not built into the motherboard)
A router head (spindle) the router mounting bracket of your choice is included with the machine
CAD/CAM (computer aided design/computer aided machining) software to create your designs and tool paths. We recommend www.vectric.com
cutting bits
material hold down. attach a piece of sacrificial mdf to the table top and machine it flat with the machine itself. then use t slot clamps, cam clamps, double sided tape, or custom fixtures to hold your part.

TRAVEL
X-24”, Y-24”, Z-4

TABLE SIZE
30 5/8” x 28 5/8”

FOOTPRINT
35 5/8” x 36”

MOTORS
4 wire bipolar 425 ounce/in Nema-23

Email me at [email protected] or call me at (559) 901-8329

Options